Corrosion resistant steels

Domex 350W and 550W are high strength and extra high strength respectively, corrosion resistant steels. They are characterised by good formability, impact toughness and weldability. Corrosion resistance is imparted by the formation of a dense, uniform oxide layer after a couple of years in-situ.
Domex 350W is available in coil thicknesses from 3.00mm to 12.00mm and Domex 550W in coil thicknesses from 3.00mm to 6.00mm. Maximum width is 1600mm. Sheets with a length between 1500 and 13000mm can be supplied.
 
Typical applications include bridges, industrial chimney stacks and containers.  

Deep drawing steels

Domex 200 is a hot rolled drawing sheet possessing excellent forming properties which can be used for stretch forming and deep drawing.
 
Available in thicknesses between 2.00mm and 16.00mm with a maximum width of 1600mm.

The lean analysis of this steel enables all conventional manufacturing and welding techniques to be used without difficulty.

Typical applications include brackets, ball bearing cages and drawn cylinders.

Domex Protect - safety protection applications

Our Domex Protect range of steels, in combination with fibre material, i.e. Aramid or Kevlar is intended for use in cash transfer vehicles, armoured personnel vehicles and safety protection applications. Use of thinner materials is important when considering the reduction of overall weight.
Domex Protect is currently available in tensile strength of 250N/mm² and 500N/mm² and in a thickness range of 2.00 - 6.00mm. Our cold reduced version, Docol Protect is available in a 450 N/mm² tensile strength and the minimum thickness is currently 1.00mm.

See Datasheets for more technical information